Dominator Somerset

14 Colour choices Smooth or woodgrain Windows available Steel gauge 0.6 BMT One or two car garages

BEAUTIFUL

The wide raised pattern design of the Dominator Somerset Garage Door is produced from heavy gauge steel to produce a distinguished horizontal dimension to entry point to your garage and home.

The ‘rectangular’ raised pattern design ofthe garage door is available in either a smooth or woodgrain finish and produces a refined feel that complements home architecture that ranges from the traditional to the modern.

AUTOMATION OPTIONS

Sectional garage doors are designed to be operated with an automatic garage door opener.

COLOUR OPTIONS

The Somerset sectional door is available in an extensive range of Pre-painted COLORSTEEL® or Powder Coated options. Please click here to view the colour range available or see chart below.

*Primarily an Australian Colourbond® Colour

The colours in this gallery are intended as a guide only. If colour selection is critical, please request a steel colour sample from us. Powder coating is also an attractive option if your preferred colour is not shown. Please make contact with your Dominator dealer for advice and samples.

FINISHES

  • Woodgrain Finish
  • Smooth Finish

Note: The process of roll forming sheet steel may cause irregularities in flat panel surfaces. Smooth finishes can highlight these irregularities under certain lighting conditions and viewpoints.
Once installed, the woodgrain texture will continue to mask any minor dents and scratches inflicted throughout the life of the door.

WINDOW OPTIONS

Note: The ‘Double Press’ range of window options is recommended for the Somerset sectional door as their size and position across the door will match the remaining pressings. Glazing with acrylic or toughened glass is available.

Some door widths create an uneven number of pressings across the panel - this will limit the window options available - please discuss with us.

Single Pressed Styles

Double Pressed Styles - Recommended for Somerset

 

LOCKING OPTIONS

When a sectional door is automated with a garage door opener, no manual locking mechanism is required. The Opener is geared so that the door cannot be pushed or pulled open from the outside.

We recommend all our Sectional Doors are fitted with an Automatic Opener from the Merlin range. If your door must be operated manually, an external lock is available as optional extra. 

HEADROOM OPTIONS

Doors are provided for standard headroom (350mm) situations, unless otherwise specified.

Rear torsion and Intermediate Low Headroom systems are available as optional extras. Contact us to discuss Low Headroom requirements.

 

LEARN MORE

 Product brochure
 Servicing and Maintenance

 

Request A Quote

 

It’s important to have peace of mind when you make a purchase, that’s why your Dominator sectional door comes with the following warranty:

  • 5 years for steel door curtain & associated labour, 1 year for surface coating, locking mechanism & all other components & associated labour.
  • Industrial/Commercial use – 1 year for all components & labour.

SIZE RANGE

Available in Daylight Opening Sizes (DLO) from 1825mm to 3440mm in height and from 2400mm to 6600mm in width.

Additional sizes may be available, please discuss your requirements with your local Dominator Dealer.

PROFILE INFORMATION

Somerset 'Double Press' profile - Roll-formed Panel with 'Rectangular' Pressings.

Manufactured from 0.6 BMT COLORSTEEL®.

Fixed Sized Pressings of 370mm H x 990mm W - Quantity is width dependant. (2.4m wide panel shown.)

INSTALLATION CLEARANCES

Recommended Clearance Requirements:

• Standard Headroom - 320mm
• Standard Headroom with opener - 350mm
• Low Headroom with opener - 200mm (Opener Recommended)
• Sideroom - 140mm
• Backspace with opener - 3550mm (Door height up to 2300mm)

Download the Dominator Framing Specification Sheet

LIFTING SYSTEMS

Doors are provided for standard headroom (350mm) situations, unless otherwise specified.

Rear torsion and Intermediate Low Headroom systems are available as optional extras.

SMOOTH & QUIET

Dominator sectional garage doors will provide you with quiet, smooth operation. 
Features include:

• Factory fitted, muntins and end styles ensure consistent panel tolerances for trouble free operation.
• Nylon wheels with ball bearings.

EASY OPERATION

Your Dominator sectional door will continue to be easy to open and close, with features such as:

• Ball bearing wheels with two-piece roll-formed track, allowing the door to run easily and smoothly during opening and closing. 
• Full sized hinges reduce stress loading for consistent operation.

WEATHER PROTECTION

The garage today is used to store many different valuable objects, and in some cases is converted into another room, so weather protection is an important feature of any garage door. The Dominator sectional door features:

• Pre-painted steel, to stand up to the harsh New Zealand climate.
• Bottom weatherseal which is soft and pliable, helping to stop leaves and rain coming in under the door.
• Mohair option available to reduce gaps between the door and the door jamb, to keep out the weather.

DURABILITY

Your Dominator sectional door will continue to operate like new, with features such as:

• Springs designed to exceed the Aus/NZ Standard for garage doors – 20,000 cycles.
• Factory fitted, muntins and end styles ensure consistent panel tolerances for trouble free operation.

 

LEARN MORE

 Product brochure
 Servicing and Maintenance

Request A Quote

A garage door with a sweeping horizontal feel created by its rectangular, (370mm H x 990mm W) raised pressings; the Somerset lends itself to modern architecture while still maintaining its traditional style.

The number of pressings across your door is determined by the overall width of the opening and the resulting amount is spaced out evenly.

Designed to be operated with an automatic garage door opener, we recommend our Merlin openers with either the Chain or Belt-drive configuration for Somerset Sectional Garage Door installations.

The ‘Double Press’ range of window options are recommended for the Somerset sectional door as their size and position across the door will match the remaining pressings. Glazing with acrylic or toughened glass is available.

Manufactured by roll-forming 0.6 BMT COLORSTEEL® and then pressing the detail into the panel, the Somerset will provide a touch of the traditional to the front of your home.

 

LEARN MORE

 Product brochure
 Servicing and Maintenance

Request A Quote